Clutch pedal extension 20mm for NA by SUBLIME Design Japan

The pedal can be adjusted by inserting it between the clutch pedal lever and the pedal cover, allowing it to move closer to the 20mm driver. This adjustment is highly advantageous for optimizing the driving position on both regular roads and race tracks, while also minimizing the strain on the left foot of individuals with shorter stature.

The product is made of MJF type PA12 material, which combines high strength and durability. Also, since it is made very lightweight, there is no adverse effect on the clutch feeling.In addition, installation is possible without processing the genuine pedal.

Effect

• Tight ankles and knees are relieved, and the degree of foot fatigue on the street is greatly improved.
• Fine adjustment of the driving position is possible. (It is also possible to improve the interference of the knee with the steering column.)
• It facilitates delicate clutch operation such as starting dashes and side turns in sports driving.

Wearing method

1. Remove the genuine pedal cover on the vehicle body side.
2. Attach the pedal rubber to the extension in advance. (Attach it while using a thin flat-head screwdriver, etc.)
3. Insert the extension into the pedal lever from the side and attach the screw to prevent it from falling off. (It is recommended to use a screw lock agent together.)

Installation video:

Notes

• Although we have conducted sufficient tests, we are not responsible for accidents caused by improper installation.
• Be careful not to over-tighten the mounting screws. Excessive tightening will damage the resin parts.